Industrial Water Treatment

Talk To A SpecialistSubmit An Enquiry

Innovative solutions for treating industrial process water, wastewater, and brines for reuse, or safe and compliant discharge to the environment.

Industrial Water Treatment

Industrial Water Treatment

Industrial water treatment is becoming important as industrial users tend to consume large amounts of water and create large volumes of difficult to treat wastewater during manufacturing and processing. In many instances companies are moving towards zero liquid discharge (ZLD) to improve sustainability outcomes or to meet Governmental regulations.

Clean TeQ Water can help clients:

  • Achieve their water quality requirements for use, reuse, or compliant discharge to the environment
  • Produce less waste during water treatment and provide systems for brine management and evaporation pond remediation
  • Selectively remove contaminants from brines and processing streams allowing them to be reused or discharged

Industrial Water Treatment Solutions

Clean TeQ Water provides innovative water treatment solutions for treating industrial process and wastewaters. By selectively removing problem contaminants such as calcium, sulphate or COD, we can avoid creating a difficult to manage saline brine, and in some cases create pure reusable product streams. We provide tailored turn-key water treatment plants to customers globally for all industries.

Industrial Water Treatment

Have an industrial water treatment issue?

We're here to help...

Targeted Contaminant Removal

Selective removal of contaminants is a key focus of our technologies, able to remove hardness (calcium/magnesium), metal contaminants, nitrate, ammonia, and a range of other pollutants with high water recovery and minimum waste production. The selective removal can avoid creating concentrated saline brines, and in some cases can create pure reusable product streams after the impurities have been removed.

Zero Liquid Discharge

Clean TeQ Water’s technologies and flowsheets provide affordable ZLD solutions. When removing contaminants such as calcium and sulphate, our CIF® (continuous ionic filtration) technology can produce a gypsum based waste which can easily be turned into solids.

Our HIROX® (high recovery reverse osmosis) technology typically achieves >95% water recovery, generating a much smaller waste volume than conventional RO. The smaller volume of concentrated brine reduces the size of evaporation ponds required, and reduces cost of evaporation systems when achieving zero liquid discharge.

Our low energy evaporation technology, EVAPX®, has higher resistance to scaling than conventional technologies since evaporation occurs away from the heat source inside the humification chamber. The system is also much easier to operate and clean since flat plate heat exchangers are used and there are no complex internal geometries in the system. The system can be operated using waste heat if available to drastically reduce the power requirements and operational costs. EVAPX® typically has lower capital and operating costs than other evaporation technologies.

Ammonia and Nitrate Removal

Our BIOCLENS® and BIONEXTM technologies can efficiently remove ammonia and nitrate to very low target concentrations (< 1ppm). They can treat saline water and highly concentrated streams (ammonia/nitrate concentrations > 1,000 ppm), which can pose an issue for conventional technologies.

Benefits

HIGH WATER RECOVERY
(TYPICALLY >90%)
ENVIRONMENTALLY FRIENDLY SOLUTIONS
LOW WASTE PRODUCTIONS
SIMPLE OPERATION AND MAINTENANCE
LOW TOTAL COST OF OWNERSHIP

Get in touch

Find out how we can help with your industrial water treatment challenge using the contact form below.




    Send to: