Clean TeQ Water provides a full range of membrane systems based on the best available membrane technology.
Membranes are universally used for filtration of waters and wastewaters in circumstances where the water quality is predictable and scaling and fouling potential is managed by pre-treatment. Different membrane technologies are used depending on what needs to be removed from water, including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO).
The difference between technologies is the size of the membrane pores, resulting in the removal of different water impurities. High pressure is applied on the feed water side of the membrane to force water through small pores, producing treated water and a brine (waste stream).
FILTRATION PROPERTIES OF MEMBRANE TECHNOLOGIES
|Approximate Pore Size (microns)||0.01||0.01||0.001||0.0001|
✓ – Filtered by the membrane
✗ – Not Filtered by the membrane
Clean TeQ Water provides a full range of membrane systems based on the best available membrane technology. We have sourcing staff around the world with good supplier relationships, ensuring products meet highest standards for an affordable cost.
RO is a key component of our HIROX® (high recovery RO) technology, making RO one of our key focuses. Our design engineers use a range of modelling software packages during detailed design to optimise flowsheets and model water recovery and scaling. Along with RO we can also provide MF, NF, UF, DTRO, CCRO and EDR/EDI systems.
Clean TeQ Water is also developing a novel membrane based on graphene oxide through its 100% owned subsidiary NematiQ. Graphene Membranes will require less energy in operation and avoid many of the scaling and fouling issues of conventional membranes. Visit NematiQ’s Website for the latest updates.
Get in touch
Find out how we can help with your water treatment challenge using the contact form below.