flowing-water

Treatment of Machining Wastewater for Nitrates

Clean TeQ’s BIOCLENS™ technology was installed at a tool machining plant in Pecky, Czech Republic in 2010. The plant had a flow rate of 3m3/h and a reactor volume of 5m3. Treatment reduced the nitrate concentration from 36mg/L to a level below the discharge limit of 10mg/L.

pecky bioclens
Photo of the treatment tank

Summary

LocationCzech Republic
TechnologyBIOCLENS™
TreatmentNitrate Treatment, Nutrient Removal
Capacity3m3/h
IndustryMunicipal Wastewater Treatment Plant
Clean TeQ’s RoleEngineering, Procurement, Construction
Start up2010